Skip to content

5. Mobile Peripherals

Most mobile peripherals connect one of three ways: Bluetooth, USB-C, or physically snapping on.

Peripheral Usual connection
Stylus Bluetooth (for pressure/buttons) + magnetic attachment, or a passive tip needing no connection at all
Case / battery case Physical only, or USB-C pass-through for charging
Docking station USB-C, often adding extra ports, power, and a monitor connection in one cable
External keyboard/mouse Bluetooth, or USB-C/USB-A if wired
Smartwatch / wearable Bluetooth, paired to one phone at a time

When a peripheral "won't pair"

Before assuming hardware failure:

  1. Confirm the peripheral is actually in pairing mode (often a held button, or a status light pattern).
  2. Check it isn't still paired to a different device — Bluetooth devices usually connect to only one thing at a time.
  3. "Forget" the device on the phone and pair again from scratch — this clears a surprising number of connection issues.

Try it

A classmate's Bluetooth earbuds connect to their laptop but not their phone. Walk through the three steps above as if you were actually troubleshooting it with them.

Tip

A stylus that "writes" but has no pressure sensitivity or buttons is probably a passive stylus, not a disconnected active one — not every stylus problem is a Bluetooth problem.

Watch along

From the CompTIA A+ 220-1201 Full Course: Mobile peripherals (29:04)

Next: Device Management →