Skip to content

7. Cabling and Connectors

Copper cabling

Category Typical speed
Cat5e 1 Gbps
Cat6 1-10 Gbps, depending on distance
Cat6a 10 Gbps at full cable length

All of these use the same RJ45 connector — the clear plastic plug you've plugged into the back of a switch or PC. The category just describes what's inside the cable, not the shape of the plug.

Fiber cabling

Fiber carries light instead of electricity, over much longer distances with less interference. Two common connector types:

Connector Looks like
LC Small, square, with a clip
SC Larger, square, push-pull (no clip)

Straight-through vs. crossover

A straight-through cable (the normal kind) connects a device to a different kind of device — a PC to a switch, for example. A crossover cable connects two of the same kind of device directly — PC to PC, switch to switch.

Try it

Look at your Lesson 5 Packet Tracer topology. Identify which links are PC-to-switch (straight-through) and which, if any, would need to be switch-to-switch or PC-to-PC (crossover).

Tip

Nearly all modern network ports support Auto-MDIX, which detects and adjusts automatically — meaning in practice, you can often use a straight-through cable everywhere today. It's still worth knowing the distinction, both for the exam and for older equipment that doesn't auto-detect.

Play it

Try the Network Cabling Lab — browse copper and fiber cable types and connectors, wire a patch cable pin-by-pin, work through job scenarios, and test yourself with an identification quiz covering cables, connectors, color codes, and install rules.

Watch along

From the CompTIA A+ 220-1201 Full Course:

Next: Network Hardware and Troubleshooting →