Skip to content

3. Practice in the Simulator

Before you touch real hardware (or if you don't have real parts yet), build your plan in the PC Parts Puzzle. It models real components and real assembly order, so the muscle memory you build here carries straight over.

The build order in the simulator mirrors the real order you'll use in Lesson 4:

  1. Prepare the case (remove panels, install any case standoffs if needed).
  2. Install the power supply.
  3. Install the CPU onto the motherboard, then the cooler on top of it.
  4. Install RAM into the motherboard's slots.
  5. Mount the motherboard into the case.
  6. Install storage drives.
  7. Install the graphics card.
  8. Connect all cables: power to everything, data cables, front-panel connectors.
  9. Power it on.

Build the exact parts list from your Lesson 2 plan, in this order, inside the simulator.

Try it

Build your planned PC in the PC Parts Puzzle, in the order above. If the simulator stops you from installing something, that's it catching a compatibility mistake — go back to your Lesson 2 plan and fix it.

Tip

Don't skip ahead to "just make it boot." The point of this lesson is the order and handling — getting comfortable with which part goes in before which other part, which is exactly what you'll rely on with real hardware.

Next: Build It for Real →