4. Printer Troubleshooting¶
Same six-step method as always: identify → theorize → test → plan and implement → verify → document. Printers just have their own set of common symptoms.
Common symptoms and likely causes¶
| Symptom | Likely cause (check in this order) |
|---|---|
| Nothing happens at all | Power, then cable/network connection, then whether it's actually set as the default/selected printer |
| Faded or streaky print | Low toner/ink, or (thermal) worn print head/wrong paper |
| Paper jams repeatedly | Wrong paper type/weight, worn rollers, or a torn piece still stuck inside |
| Print job stuck in the queue | The printer's own queue/spooler needs clearing, often from the computer's print settings |
| Garbled or wrong characters printing | Wrong or corrupted driver |
| Prints from one computer, not another | Narrow it to that computer specifically — driver or connection on that machine, not the printer |
Clearing a stuck queue¶
A classic first fix: cancel all jobs in the print queue, restart the print spooler service (or the printer itself), then try again. This alone resolves a large share of "it just stopped printing" reports.
Try it
Walk through all six troubleshooting steps for "print jobs stuck in the queue" as if a classmate reported it to you — don't skip to the fix without stating a theory and testing it first.
Tip
If it prints a test page from the printer's own control panel but not from any computer, that isolates the problem to connectivity or drivers — the printer's print engine itself is fine.
Play it
Open the Printers and Peripherals Lab and use the Troubleshoot tab.
Watch along
From the CompTIA A+ 220-1201 Full Course:
- Troubleshooting printers (3:51:55)
- Printer troubleshooting (4:09:07)
- Advanced printer troubleshooting (4:33:20)