2. Plan Your Build¶
Just like you planned your text adventure before building it, you plan a PC before buying or touching a single part. Experienced builders write a parts list and check every entry against the others before anything gets ordered or installed.
The compatibility checklist¶
| Check | What to compare |
|---|---|
| CPU ↔ Motherboard | CPU socket type must match the motherboard's socket exactly (e.g. a specific socket generation) |
| RAM ↔ Motherboard | RAM type (e.g. DDR4 vs. DDR5) and speed must be supported by the motherboard |
| PSU wattage ↔ Everything | The power supply must comfortably exceed the total power draw of the CPU + GPU + drives + fans |
| PSU connectors ↔ Motherboard/GPU | The motherboard and GPU need specific power connectors the PSU must actually have |
| Case ↔ Motherboard | The motherboard's form factor (e.g. ATX, Micro-ATX) must fit the case |
| Cooler ↔ CPU | The cooler must support the CPU's socket, and fit in the case |
| Storage ↔ Motherboard | Confirm the motherboard has the right connector/slot for your drive |
Miss any one row and the build either won't fit together, won't power on, or will throttle itself to avoid frying something.
Write your build plan¶
Before Lesson 3, write out:
- A list of all 8 components from Lesson 1, with a specific part for each.
- For each row of the checklist above, write the matching spec for both sides (e.g. "Motherboard socket: X — CPU socket: X — match ✓").
- Your PSU's total wattage, and a rough estimate of your build's total power draw.
Try it
Write your build plan. If you guessed in Lesson 1 that CPU and motherboard sockets have to match, check your guess now — you were right.
Tip
"Measure twice, cut once" applies especially here: a compatibility mistake caught on paper costs you nothing. The same mistake caught after installing parts can mean cracked hardware.
Watch along
From the CompTIA A+ 220-1201 Full Course:
- Motherboard components (3:06:48) — sockets and form factor
- RAM and CPU basics (3:17:27) — RAM type and speed matching