5. First Boot and POST¶
Before an operating system ever loads, the motherboard runs POST — the Power-On Self-Test. It checks that the CPU, RAM, and graphics output are all present and working, before trying to boot anything. This is why a dead RAM stick can stop a PC from ever reaching an OS: POST catches it first.
A successful first boot looks like:
Power on → fans spin → POST runs (usually under a second, sometimes a logo screen) → BIOS/UEFI splash or boot menu → OS starts loading
If it doesn't boot, POST usually tells you where it failed — through beep codes (a pattern of beeps from the motherboard speaker, if it has one), POST code LEDs, or an on-screen error. The exact codes vary by motherboard manufacturer, so the real first step is always: check your specific motherboard's manual for what its codes mean.
Entering the BIOS/UEFI¶
Immediately after powering on, press the key your motherboard shows on screen (commonly Del or F2) to enter the BIOS/UEFI setup screen instead of continuing to boot. From here you can check that your RAM and storage are detected, set the boot order, and check CPU temperature at idle.
Try it
Power on your build. If it boots, enter the BIOS/UEFI and confirm your CPU, RAM capacity, and storage drive are all correctly detected.
Tip
No display at all? Before assuming the worst, check the basics first: is the monitor cable plugged into the graphics card, not a port on the motherboard that your CPU doesn't support for video? Is everything actually receiving power? Most "dead" first boots turn out to be a cable.
Watch along
From the CompTIA A+ 220-1201 Full Course:
- BIOS/UEFI security (3:30:08)
- System monitoring (3:35:48)