4. Network Types and Topologies¶
Network types, by size¶
| Type | Covers | Example |
|---|---|---|
| PAN | A single person's immediate devices | A phone paired to a smartwatch via Bluetooth |
| LAN | One site | The lab's own 192.168.137.0/24 network |
| WAN | Multiple sites, often far apart | The internet itself, or a company connecting its branch offices |
Topologies, by shape¶
A topology is the pattern devices are connected in — the same planning step as a flowchart in Unit 1, just diagramming cables and devices instead of logic.
| Topology | Shape | Trade-off |
|---|---|---|
| Star | Everything connects to one central device (a switch) | One cable failure only drops one device; the central device is a single point of failure |
| Mesh | Every device connects to every other device | Extremely resilient, but needs far more cabling as it grows |
| Bus | Every device shares one single cable | Simple and cheap, but one break can take the whole segment down |
Almost every modern LAN — including the lab's own network — is a star topology, with a switch or router at the center.
Plan a topology¶
Before Lesson 5, plan a small network in draw.io:
- 2 PCs, 1 switch, 1 router, laid out as a star topology.
- Label each device with a planned IP address, all in the same
/24network from Lesson 2. - Decide what the router connects to beyond this network (a stand-in for "the internet").
Try it
Draw the topology above in draw.io. Save it — you'll build this exact plan for real (in Packet Tracer) in the next lesson.
Tip
Planning the IP addresses on paper first means you won't be guessing or renumbering mid-build — the same "measure twice, cut once" lesson from the PC Building Lab.
Watch along
From the CompTIA A+ 220-1201 Full Course:
- Network standards and devices (1:27:51)
- Network types (2:20:06)