Skip to content

6. Installing an OS

A PC with no storage formatted and no operating system installed will POST successfully and then have nowhere to boot to. Installing an OS is what turns a pile of working hardware into a usable computer.

The general process

  1. Create install media — a USB drive with the OS installer written to it (tools like Rufus do this for Windows; Linux distributions usually provide their own official instructions for writing an installer to USB).
  2. Boot from it — in the BIOS/UEFI boot menu (often reached with a key like F12 right at power-on), choose the USB drive instead of the internal storage drive, since the OS isn't installed there yet.
  3. Partition and format the storage drive — the installer will offer to erase and format your drive. Double check you're formatting the right drive if more than one is connected.
  4. Follow the installer — region/language, account setup, and the installer copies itself onto the drive.
  5. First boot into the installed OS — remove the USB drive and boot normally; the system should now boot straight from internal storage.

Try it

Install an OS on your build. If you're using a license-restricted OS, use whatever your instructor has approved for lab use.

Tip

"Which drive do you want to erase?" is the single most consequential question an OS installer ever asks. If more than one drive is connected and you're not 100% sure which one is which, disconnect every drive except the one you're installing to.

Next: Troubleshooting Common Problems →